|
|
Build Your Online Product Catalogs?
Voltage
600V or less
Construction
Sino-cables MC Type is constructed with Type XHHW-2 conductors rated 90ï¿?wet or dry, and a bare equipment grounding conductor. The Conductors are AA-8000 series Aluminum Alloy co***ct stranded. A binder tape is wrapped over the conductors with interlocked aluminum tape applied over the assembly. Individual conductors are color coded per ICEA S-58-679, Method 3, Table 2 (Single color compounds with surface printing). A PVC outer sheath is needed for direct burial.
Copper conductor is also available.
Standard
UL 44, UL 1569 for type MC; ICEA S ï¿?95-658; NEMA WC70; Federal Spec A-A59544 (formerly J0B); IEEEE 1202 70,000 BTU vertical flame test; CSA Spec. C22.2, No. 51 - Armoured Cables.
Features
1. Up to 50% fewer installation steps; Pre-assembled and pre-tested; Lighter weight; Flexible, unlimited bends; Lower material and labor costs(Reduces installation costs up to 50% over pipe and wire); Ideal for vertical applications.
2. Cable reverse wound on reel for ease of pulling and installation When pulling from coils, pull from inside to ensure of installation.
3. Anti-short bushings are not required for use with MC cable per the NEC and UL.
Applications
1. Sino-cables MC Type is suitable for use in branch, feeder and service power distribution under high ambient temperature in commercial, industrial, institutional, casinos and multi-residential buildings; for power, lighting, control and signal circuits; in concealed or exposed installations; Fished or embedded in plaster; in environmental air-handling ***ces per NEC 300.22; in places of assembly per NEC 518.4 and theaters per NEC 520.5; in aerial applications when attached to a messenger; for installation in cable tray and approved raceways; under raised floors for IT equipment per NEC 645.5(D) and 645.5(D)(2); Class I Div 2, Class II Div 2, Class III Div 1 hazardous locations.
2. used in wet or dry locations at temperatures not to exceed 90C.
3. Available with PVC jacket for direct burial and encase |
| Company: |
Jiangsu Sanqi Cable & Wire Co., Ltd,
|
| Contact: |
Mr. Leo Wang |
| Address: |
the west end of Yongtong Avenue, Rudong economic development area, Jiangsu, China |
| Postcode: |
226400 |
| Tel: |
0513-68971818 |
| Fax: |
0513-68971820 |
| E-mail: |
|
|
|
|
Home
